| |
Expanded Metal Reference |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
SWO |
SHORT WAY of OPENING , the distance measured from the inside of the bond across to this inside of the bond SWD. |
|
|
LWO |
LONG WAY of OPENING , the distance measured from the inside of the bond across to the inside of the bond LWD. |
|
|
STRAND STRIP |
Amount of material fed into the press to produce one strand. |
|
|
STRAND THICKNESS |
In standard, it is the gauge of the base metal. In flattened, it is the overall thickness of the finished sheet. |
|
|
SWD |
The distance from an outside point on a bond to a corresponding point on the following bond measured across the SHORT WAY of DESIGN. |
|
|
LWD |
The distance from an outside point on a bond to a corresponding point on the following bond measured across the LONG WAY of DESIGN. |
|
|
|
|
|
